Capable of converting analog to digital formats with multiple adjustments and range to achieve the most ideal video image.

• VGA (15 pin HD) with audio to UltraHD 4K display
• Built-in scaler to upscale video resolutions up to 4K@60Hz
• 3.5mm stereo audio input

View more details »

The KanexPro VGA plus Audio to HDMI Converter is a classic fit for converting VGA sources to HD displays and projectors.

• Supports data rates to 6.75Gbps
• Supports resolutions up to: HD 1080p
• PC resolutions: UXGA (1600x1200) with 10-bit DAC

View more details »

Designed to extend natural and uncompressed ultra HD 4K signals from your HDMI source device to a 4K display remotely located 330 feet away and full HD 1080p signals up to 330ft.(100m).

• HDCP 2.2 and EDID compliant
• Dolby TrueHD & DTS Master Audio ready

View more details »

Designed to extend natural and uncompressed ultra HD 4K signals from your HDMI source device to a 4K display remotely located 230 feet away and full HD 1080p signals up to 230ft.(70m).

• HDCP 2.2 and EDID compliant
• Dolby TrueHD & DTS Master Audio ready

View more details »

Uses HDBaseT technology to transmit uncompressed, high-resolution 1080p/ 4K signals from transmitter to the receiver via a CAT5e/CAT6a cable at a distance of up to 70/40m.

• Extend full HD 1080p up to 70m
• Extend 4K/60 up to 40m
• HDCP 2.2 and EDID compliant

View more details »

A transmitter - receiver set which enables you to extend 1080p/60 HD signals up to 492 feet (150 meters) over single CAT6 cable.

• Compact 150m HDMI extender over CAT6
• HDCP 1.4 & EDID compliant
• Extends up to 492ft. (150m) with full HD 1080p/60

View more details »

The KanexPro Long-Runner employs HDBaseT technology to route high-resolution HDMI signals from the source up to 330 feet (100m) to your HD display.

• Supports POE from Tx or Rx
• High bandwidth up to 10.2 Gbps
• Audio support: Dolby TrueHD & DTS Master Audio, 7.1 compliant

View more details »

A compact 2-input transmitter for sending 4K HDMI video signals or 15-pin HD analog video, audio and control up to 230 feet (70m) over a shielded CAT6.

• Auto-switching between inputs
• Supports computer and video resolutions up to 1920x1200, including 1080p/60 and 4K

View more details »

A 4K compliant transmitter - receiver set that enables you to routes ultra high – definition signals up to 330 feet (100 meters) over single CAT6 cable using HDBaseT Technology.

• Extend uncompressed HDMI signals up to 330 ft. (100m) on single CAT6 cable
• HDCP, CEC and EDID compliant

View more details »

A compact HDMI Extender with local HDMI output designed to carry DVI/ HDMI signals over distances beyond the capability of standard HDMI/ DVI cable.

• Local HDMI output on Transmitter for preview
• Supports full HD 1080p (1920x1080@60Hz)
• Digital audio support

View more details »

For dynamic range and wide color range (gamut) HDR and 4:4:4 Chroma color sampling are one of the key features of these extenders.

• HDMI loop-out
• Extend up to 50m for 4K/60 video w/ 4:4:4 Chroma
• HDR (High Dynamic Range) & Wider color gamut support

View more details »

A one transmitter and four receiver amplifier set that enables high resolution 1080p HDMI signals to be routed over distances up to 394ft.(120m) significantly beyond the capability of standard HDMI connectivity.

• Distribute & Extend HDMI over Single CAT5e/6 to four HD displays
• Includes 4-independent receivers

View more details »

The transmitter inputs the HDMI signal into eight identical outputs carrying 394 ft./1080p resolution simultaneously from the provided receivers.

• Distribute & Extend HDMI over Single CAT5e/6 to Eight HD displays
• Includes 8-independent receivers
• Supports 5.1, 7.1 digital audio and uncompressed LPCM

View more details »

A one input, two output HDMI Distribution Amplifier engineered to split 4K quality videos or high res images from one source to two 4K displays with resolutions up to 4K@60Hz and HDCP2.2 specifications.

• Distribute one 4K HDMI video and audio signals to two displays
• EDID Selector for optimal resolutions

View more details »

The KanexPro SP-HD20-1X44K is an one input, four output HDMI Distribution Amplifier engineered to split 4K quality videos or high res images from one source to four HD 4K displays with resolutions up to 4K@60Hz and HDCP2.2 specifications.

• Distribute True 4K HDMI video and audio signals to four HD 4K displays
• EDID Selector for optimal resolutions

View more details »

A 4K@30Hz compliant distribution amplifier which lets you duplicate one HDMI source to 2 displays without losing signal integrity and resolution.

• Distribute high-resolution HDMI signals to 2 Ultra HD displays
• Computer resolution up to WUXGA (1920 x1200@60Hz)
• HDCP & CEC compliant Supports

View more details »

A 4K@30Hz compliant distribution amplifier which lets you duplicate one HDMI source to four displays without losing signal integrity and resolution.

• Distribute high-resolution HDMI signals to 4 Ultra HD displays
• Supports 4Kx2K resolution
• EDID mode for copying the same resolution to input port

View more details »

Distributes a single HDMI source to two displays and support video resolutions up to 4K@60Hz (4:4:4) and comply with the HDMI 2.0b and HDCP® 2.2 standards.

• UltraSlim 1x2 HDMI DA with 4K UHD resolutions
• Supports 1080p/60 & 4K/60Hz resolutions
• Incredibly thin design

View more details »

Distributes a single HDMI source to two displays and support video resolutions up to 4K@60Hz (4:4:4) and comply with the HDMI 2.0b and HDCP® 2.2 standards.

• UltraSlim 1x4 HDMI DA with 4K UHD resolutions
• High-bandwidth 18 Gbps
• Auto-identifies input resolutions to match displays

View more details »

A lightweight HDMI splitter that distributes one HDMI input into eight identical outputs supporting uncompressed 4K UHD resolutions.

• Supports full HD 1080p (1920 x 1080@60Hz) & 4K UHD
• Built-in Smart EDID Control
• Front-panel LED’s for input/ output signal presence

View more details »

A lightweight HDMI splitter that distributes one HDMI input into eight identical outputs supporting uncompressed 4K UHD resolutions.

• Supports full HD 1080p (1920 x 1080@60Hz) & 4K UHD
• Conforms to High Speed HDMI 2.0 specifications
• Front-panel LED’s for input/ output signal presence

View more details »

One HDMI input with four output over HDBaseT is a half-rack width distribution amplifier, which reliably broadcasts one HDMI source signal to four Ultra HD 4K displays over single CAT6.

• Broadcast one Input to four 4K UHD displays
• Bandwidth up to 10.2 Gbps
• Daisy-chainable to up to 12 displays

View more details »

An UltraSlim auto-switcher with 4–input and 1-output which auto-identifies input resolutions of up to four HDMI devices to one 4K display supporting full 4:4:4 YUV color space and 18 Gbps of bandwidth.

• UltraSlim 4x1 HDMI switcher w/ ARC
• Supports 4K x 2K@60Hz
• Auto-identifies input resolutions to match displays via hot-plug

View more details »

KanexPro 4K/30Hz HDMI 3X1 Switcher

A high-performance, three HDMI input to one HDMI output switcher engineered to support True4K UHD resolutions up to 4K@30Hz with HDCP2.2 specifications.

• Auto switch three HDMI sources to one 4K display
• Computer resolutions up to QSXGA@60Hz
• Supports 3D frame sequential video formats to 1080p @60Hz

View more details »

KanexPro 4K/30Hz HDMI 5X1 Switcher

A high-performance, five HDMI input to one HDMI output switcher engineered to support True4K UHD resolutions up to 4K@30Hz with HDCP2.2 specifications.

• 4K@30Hz UHD, 1080p & 3D resolutions
• Computer resolutions up to QSXGA@60Hz
• High bandwidth for ultimate video experience

View more details »

A simple switcher designed to connect three HDMI sources such as Apple TV, Blu-ray, PS4 or Xbox one to your 4K, HDTV or a projector.

• Rapidly switch between 3 inputs to one output
• Audio support: Dolby TrueHD, DTS-HD Master Audio 7.1ch
• Supports all 3D formats

View more details »

A simple switcher designed to connect three HDMI sources such as Apple TV, Blu-ray, PS4 or Xbox one to your 4K, HDTV or a projector.

• HDCP and EDID Compliant
• Switch using a manual button or included IR remote
• Supports High Speed HDMI

View more details »

A compact design HDMI switcher that allows connection to four Ultra HD or 1080p devices to one Ultra HD display with dedicated digital and stereo audio outputs.

• Supports 4K Ultra HD resolutions & 1080p HD
• 3DTV Pass-through
• Lip Sync pass-through

View more details »

This matrix switcher is HDCP 2.2 compliant and supports 4K@60Hz, 4:2:0 video. it can be controlled via front panel buttons, IR remote and RS232 commands.

• Cross switch 4-HDMI sources to 4-HDMI displays with 4K/60Hz
• Fully compliant with the HDMI 1.4 and HDCP 2.2 specifications
• Smart EDID management to match the connected displays

View more details »

The KanexPro SW-HDSC914K is a 9-Input switcher and presentation scaler with true 4K input and output resolutions up to 3840x2160p.

• Auto switch & scale 9-inputs to two 4K displays
• Built in 40 Watt amplifier for speaker systems
• POH – receiver inclusive

View more details »

A 7-input, 1 output to HDMI presentation scaler- switcher engineered to upscale HDMI / DisplayPort and VGA devices creating a Quad Window experience in any collaboration space.

• 4K Multiviewer Switcher with integrated switching
• Supports multiple HDMI output resolutions: 4Kx2K@30Hz &1080p/60Hz

View more details »

A professional 4-in and 4-out HDMI matrix featuring HDCP 2.2 and the latest HDMI 2.0 specifications supporting ultra HD resolutions up to 4K @60Hz.

• Distribute 4Kx2K@60Hz signal up to 5m over HDMI (max.)
• Supports Dolby Vision & HDR pass-thru
• HDCP 1.4 & 2.2 Compliant

View more details »